Rotafix EP3 Machine Bed Grout

Rotafix EP3 Machine Bed Grout is a three-part high strength epoxy system used for high-performance anchors and under machine bed plates, particularly where high dynamic loads are involved.

Rotafix EP3 Machine Bed Grout
Rotafix EP3 Machine Bed Grout

Rotafix EP3 Machine Bed Grout has a compressive strength in excess of 75N/mm2 making it ideal where there are high loads associated with heavy machinery and equipment. Complete machine beds can be formed or EP3 Grout can be used a patch repair mortar. When patching new to existing concrete we recommend cleaning any debris or loose concrete then size the repair area with Rotafix P12 primer to aid the adhesion of the new materials to the existing substrate.

Rotafix EP3 can also be used to create high-performance chemical anchors in concrete and stone where the loads are fluctuating. For smooth holes where there is a likely to be an accumulation of water then also consider the use of Zeroset Anchor Grout as an alternative as this will displace water and cure underwater and give comparable tensile and compressive performance.

Rotafix EP3 Grout can be applied in thicknesses ranging from 5mm to 150mm. The pot life of EP3 is up to 1 hour at 18 deg c. The cure is dependent on the thickness with 25mm thick coating gelling up in 4 hours and achieving ultimate load at 80 hours again at 18 deg c.

Additional Information:

N/A

Supplied with:

N/A

Available Sizes:

  • 2.5L (Product code: 3201)
  • 7.5L (Product code: 3205)

Leave a Reply