Case Studies
Rotafix in association with the Malaysian Timber Industry Board and Woodfields Group of Companies are pioneering the use of Glulam in construction. Glulam is bonded, laminated timber beams and this short film shows how it works.
Flame Retardants in the London Underground
London Underground are using a flame retardant supplied by Rotafix to reduce the incidence and spread of fire in the timber sleepers supporting the rails in the London Underground
Zeroset T Anchor Grout Lighting Stands
This case study shows how Zeroset T Anchor Grout has been used to bond studs into concrete for the mounting of bracketry for the lighting stands at the side of the carriageway.
Underground Waterproofing using Aquachem
This case study shows the work completed on the underground car garage located beneath Lancaster House in London. The case study shows the process of waterproofing the sealing and coatings the floors and walls with Aquachem.
Brake Roller refurbishment with Zeroset WJ
This case study shows the work completed on the rolling road of an MOT Test Centre. Zeroset WJ is a thick adhesive coating that can be applied to metal. The adhesive is then coated with grit to provide a tough surface for testing the braking performance of vehicles.
Ballycopeland Windmill Bonded in Rods
The Ballycopeland Windmill in Millisle, Co. Down is prime example of low disturbance methods reducing the cost and time associated with making an essential repair. The main beam on the fan table supporting the rear fan had decayed and needed to be replaced. This case study outlines the repairs using TG6, Rotafix Structural Adhesive, Bonded in Rods and Timber Resin Splice.
St Katharines Dock, London Bridge Repairs
The Coronarium Bridge in the basin of St Katharine’s is a cantilevered rising public footbridge with each side consisting of two arms and a counter-weighted section supported by a pivot on top of the portal beam. Over the years the bridge has been subjected to the general usage, weather as well as the occasional knock from an errant boat that has resulted in a number of structural issues that have led to decay and failure. This case study outlines the repairs using TG6, Rotafix Structural Adhesive, Bonded in Rods and Timber Coatings.
Aydon Castle - Resiwood System
According to English Heritage, Aydon Castle was originally a wooden baronial hall built by Hugh de Reymes in the13th century. It overlooks the valley of the Cor Burn in Aydon, near Corbridge, Northumberland, North England.
Protecting Masonry from Moisture Penetration
This case study shows you how to protect masonry from moisture penetration by using Rotafix Vinachem to produce a breathable protective coating for your masonry.
Protecting a floor using Aquachem
This case study shows the work completed on the floor to protect the floor from moisture penetration at the wall to floor joints and penetrating through the slab. A high volume low pressure air system is used to apply the coating showing how quickly the floor can be coated.
Basement Tanking and Flexible Joints
This case study shows a step by step guide to using Rotafix Zeroset WJ to create a flexible floor to wall joint and then Rotafix Rendacreate and Rotafix Aquachem coatings to create a watertight solution for basements.
Chigwell School TG6 Roof Repairs
Chigwell School in Essex is a Grade 1 listed building dating back to 1816. A leaking roof has led to long term decay to main structural elements of the roof structure. Using TG6 as a bearing surface it was possible to repair in situ the roof structure with minimal disturbance.