Product Details

Stone Repair Putty

Rotafix Stone Repair Putty is a 2-part epoxy system. When combined the repair putty is a malleable compound that can be hand or trowel applied to masonry and then roughly shaped to the contours of the substrate. Once cured the product can be machined, sanded or chiseled into a finished profile.

Repair damaged stone surfaces

A flexible compound that can be applied to masonry surfaces, molded to fit contours, and once cured can be sanded or chiseled into a polished profile.

Rotafix's strengthening techniques were invaluable to the project by ensuring the complex remained open throughout the repair works and the aesthetic of the exposed timber frame was retained.

— J LongwillStructural Engineer

Light Weight Epoxy Mortar - great product, great service, all companies should be like this, Thanks

— Ian ForwardBradford, UK

Rotafix Structural Adhesive - Excellent product

— Keith Burdett Wales

Good technical support on all aspects of wood repairs continues to play a major role. The quality and service of Rotafix is critical, as well as timely delivery. Rotafix staff are always very accommodating to ensure the applications are suitable. 

— J.R.SolomonWinnipeg, Canada

Additional Information

Available Sizes
  • 2L (Product code: 3451)
Product Coverage

When the total of both components are mixed together a volume of 2 litres will be produced.
As a guide, a complete pack will fill a void of 40mm x 40mm x 200mm.

How to use

Preperation
Surfaces should be clean and free from contaminants. Grit blasting, water jetting, needle gun and scutching techniques are acceptable methods of preparation. Dense stone or masonry may require treatment with P12 PRIMER.

Miixing
Take equal portions by volume from each of the base and curing agent containers. Mix thoroughly by hand as if preparing a dough. Alternatively, for larger volume repairs, empty the contents of both containers onto a clean polythene sheet, and with the aid of gloved hands, mix as described above until a homogeneous colour is obtained.

Application
The mixed STONE REPAIR PUTTY should be placed firmly into the cavity or aperture and consolidated either by hand or with a steel or wooden float. Ensure that the volume of material used is slightly more than that required to fill the hole. Final profiling is to be carried out after initial cure. A Thickness of 50mm or more may be installed in one
application. On larger areas, the finished surface may be improved by patting or smoothing with a spatula or float. For best finish results, keep the float clean by wiping with a cloth moistened with detergent water solution.

Product Support

For technical advice call us on+44 (0) 1639 730481 or email sales@rotafix.co.uk to discuss your requirements. 

Pack Includes

  • 2L Container

  • Product Instructions

FAQs

Please read our FAQs page to find out more.

Is Aquachem suitable for all floor types

xdgdeagae

What colour is Aquachem

Use this text to answer questions in as much detail as possible for your customers.

How do you apply the liquid membrane

Use this text to answer questions in as much detail as possible for your customers.

What preperation do you need to make pre applying

Use this text to answer questions in as much detail as possible for your customers.

Didn’t find your answer?

Don't hestitate to contact us

Downloads

Data Sheet

Download

Safety Data Sheet

Download