Product Details

Zeroset Anchor Grout

Rotafix Zeroset  Anchor Grout is a 2-part high strength epoxy system which is used for the fixing of metallic objects into concrete. Rotafix Zeroset Anchor Grout has been specifically designed for setting at low temperatures in smooth walled, diamond drilled holes. Rotafix Zeroset Anchor Grout will cure underwater. This high performance chemical anchor adhesive has been approved by the Department of Transport for parapets and street lighting.

Secures metal bolts into concrete

This high performance chemical anchor adhesive has been approved by the Department of Transport for parapets and street lighting.

Rotafix's strengthening techniques were invaluable to the project by ensuring the complex remained open throughout the repair works and the aesthetic of the exposed timber frame was retained.

— J LongwillStructural Engineer

Light Weight Epoxy Mortar - great product, great service, all companies should be like this, Thanks

— Ian ForwardBradford, UK

Rotafix Structural Adhesive - Excellent product

— Keith Burdett Wales

Good technical support on all aspects of wood repairs continues to play a major role. The quality and service of Rotafix is critical, as well as timely delivery. Rotafix staff are always very accommodating to ensure the applications are suitable. 

— J.R.SolomonWinnipeg, Canada

Additional Information

Available Sizes
  • 500cc (Product code: 3543)
Product Coverage

A 500cc pack is sufficient for use with 4 No. Halfen Unistrut A4-80 30mm Ø socket insert, Ref: TD 206 MD 01 B. Fixed in a 36mm Ø, 235mm deep diamond drilled hole.

How to use

Preperation
Detailed preparation for the installation of parapet anchorages is indicated in
PD/3543/TD. Copies available from Rotafix and Halfen Unistrut Technical Departments.
Holes for the 30mm Ø socket insert should be drilled minimum 36mm Ø (for a 3mm grout anulus) and maximum 38mm Ø. Holes must be clean, free from grease and concrete drilling paste. Dampness can be tolerated. The anchors used for Parapets should be
Halfen's socket insert Specification TD206/1 as shown on data sheet TD 206 MD 01 B.

Mixing
Add the contents of container B to the contents of container A and mix thoroughly in order to obtain a uniform grey colour. The resulting mix should be poured or pumped into place and the socket insert installed all within 20 minutes of commencement of mixing, assuming a temperature of 15°c.
Using the tongue depressor supplied, scoop the base contents one third at a time into the
hardener. The material must be thoroughly mixed between each addition of the base.

Product Support

For technical advice call us on+44 (0) 1639 730481 or email sales@rotafix.co.uk to discuss your requirements. 

Pack Includes

  • 500cc Base Coat

  • 500cc Hardener

  • Product Instructions

FAQs

Please read our FAQs page to find out more.

Is Aquachem suitable for all floor types

xdgdeagae

What colour is Aquachem

Use this text to answer questions in as much detail as possible for your customers.

How do you apply the liquid membrane

Use this text to answer questions in as much detail as possible for your customers.

What preperation do you need to make pre applying

Use this text to answer questions in as much detail as possible for your customers.

Didn’t find your answer?

Don't hestitate to contact us

Downloads

Data Sheet

Download

Safety Data Sheet

Download